Tools Required

• Small flat screwdriver or plastic trim removal tool

• Torx screwdriver (if applicable)

• Microfiber cloth

• Optional: masking tape to protect surrounding paint

Preparation

• Park the vehicle on a flat surface.

• Switch off ignition and secure the vehicle.

• Clean the grille area to remove dust and dirt.

Tip: Apply masking tape around the emblem area to protect the grille and bumper from scratches.

Removing the Original Emblem

The factory front emblem is clipped into the grille.

1. Carefully access the rear side of the grille if possible.

2. Gently release the retaining clips using a plastic trim tool.

3. Push the emblem forward evenly — do not use excessive force.

 Important: Work evenly around the emblem to avoid breaking the clips or damaging the grille.

Installing the New Carbon Emblem

Our Streetstylez carbon emblem is designed as a direct replacement (plug & play).

1. Align the new emblem with the grille opening.

2. Carefully press it into position.

3. Ensure all clips engage evenly and securely.

The emblem must sit flush and centered in the grille.

Final Check

• Gently pull on the emblem to confirm it is properly secured.

• Remove protective tape if used.

• Clean fingerprints with a microfiber cloth.

Installation time: approx. 15–30 minutes

Important Notes

• Do not use excessive force.

• If clips are difficult to release, warming the plastic slightly with a hair dryer can help.

• Professional installation is recommended if you are unsure.